Model: IPC9800ADH 7" IPS touch screen IP camera CCTV tester monitor WIFI built-in POE 12V2A output support ONVIF
IP 4MP max+ Analog +HD AHD2.0+CVI2.0+TVI3.0 cameras testing=Video display 1080p
This model can not test SDI cameras. If you need SDI function, please contact us.
All buttons are in English. This model can not be added Multimeter, optical fiber, VFL or TDR.
2.1 General The 7 inch touch screen IP camera monitor and tester is designed for maintenance and installation of IP cameras and analog cameras as well as other security equipment. The 1280x800 resolution enables it to display network HD cameras and analog cameras in high resolution. The unit supports many ONVIF PTZ and analog PTZ control. The combination of touch screen and key buttons make the IP camera tester very user- friendly.
The tester is also a great tool for Ethernet network testing. It can test PoE power voltage, PING, and IP address searching. You can use the blue cable tracer to locate individual connected cables from a bundle of cables. Test LAN cable for proper connection termination. Other functions include providing 24W PoE power to your camera, LED Flashlight, DC 12V 2A power output and much more. Its portability, user-friendly design and many other functions make the IP tester an essential tool for all installers or technicians.2.2 Features
IPS 7 inch HD TFT-LCD test monitor (1280*800) with capacitive touch screenIP discovery , it can auto-scan the whole network segment IP, and auto-modify tester's IP addressRapid ONVIF, search camera quickly, auto log in and display image from the camera, activate Hikvision camera.Hik test tool app is design for activating and debugging Hikvision camera, can auto-identify unactivated hikvision camera, also can display image from the Hikvision camera. test tool app is design for Dahua Camera test, and modify IP, user name and password parameters etc
It is used unique hardware decoding, display image from the 4 MP camera via main stream.
You can select sub-stream to test higher resolution (such as 5MP…) camera ONVIF IP camera video testing. Compatible with H.264/MPEG4/MJPEG IP cameras, such as Dahua, HIKVISION, and ACTI Customized service is available.Built in Wi-Fi, can receive image from wireless camera, as well as ONVIF and customized IP cameras.SDI Digital camera image display, record and screen snapshot * (Optional)HD CVI camera image display, zoom, video record and playback ,Coaxial PTZ control and call camera OSD menu * (Optional)HD TVI camera image display, zoom, video record and playback ,Coaxial PTZ control and call camera OSD menu * (Optional)AHD camera image display, zoom, video record and playback, Coaxial PTZ control and call camera OSD menu * (Optional)HDMI signal output, supports up to 1080P. Analog camera image display, auto adapt and display the video format of NTSC/PALSupport more than 30 protocols, such as PELCO-P,PELCO-D,SAMSUNG etcVideo image digital zoom to view the image in greater detail. Snapshot function allows you to save the current image as a JPG file in the SD card.
LED Flashlight. GB Micro SD card included. LCD screen brightness/contrast/color Saturation adjustableVisual fault locator, to test fiber's bending and breakage * (Optional)Optical power meter, test fiber loss and value * (Optional) Digital Multi-meter , DC and AC voltage measurement, Resistance measurement Continuity test, Diode measurements, Capacitance measurement * (Optional)Video Signal Generation: PAL/NTSC multi-system color bar video generator, transmit colorful images, and white, green, red, blue and black images .PEAK video signal level, SYNC signal level, Color burst chroma level measurement, test video signal attenuation * (Optional)Cable tracer, by sending the audio signal, enables the blue cable tracer tester to find the connected cable from messy cables. * (Optional)Ping test, PING is the most conventional network debugging tools; it is used for testing if the connected IP camera or other network equipment's Ethernet port is working normally and the IP address is correct.In digital IP surveillance applications, if the IP camera's IP address is not known; the device cannot be used. An IP address scan can quickly search for the connected IP camera or other network device's IP address.
The PoE voltage test can test for PoE voltage when a POE switch is supplying POE power to an IP cameraTDR cable test, test cable open circuit and short-circuit * (Optional)
Cable test , Test LAN cable or telephone cable,UTP cable etc ,cable type and the sequence of wires will be displayed
Support RS485,rate 600 ~ 115200bps adjustable
PTZ protocol analysis, control protocol command displays to check RS485 transmission
whether is normal, easy to find the fault device
PTZ control. Pan/tilts the P/T unit, zooms in/out the lens, adjusts the focus, aperture and
sets and the preset position
DC5V 2A power output for USB charging (No USB data exchange, voltage only) PoE power output, supply temporary power for PoE camera DC5V 2A power output, as a power bank Audio input and output, test and output the audio signal 7.4V Lithium Ion Polymer Battery ,Working time lasts 10 hours, after charging for 6 ~7 hours
2.3 Function 2.3.1 Touch screen and OSD menuThe IP camera tester combines touch screen control and physical buttons. This combination makes the tester very user friendly. The test meter allows you to move the function icons from the tester's main menu to the APPS folder or move them back to customize the main menu2.3.2 IP discoveryIP discovery, it can auto-scan the whole network segment IP, and auto-modify tester's IP address 2.3.3 Rapid ONVIFRapid ONVIF, search camera quickly, auto log in and display image from the camera, activate Hikvision camera.2.3.4 Hik test tool Hik test tool app is design for activating and debugging Hikvision camera, can auto-identify unactivated hikvision camera, also can display image from the Hikvision camera.2.3.5 DH test toolDH test tool app is design for Dahua Camera image test, modify IP, user name and password parameters etc 2.3.6 IP camera testThe device is designed for ONVIF IP camera testing. It can display the image from an IP camera and change the IP address.
The 7 inch 1280x800 screen display allows the user to view the image with a sufficient screen size.
With the ONVIF tool, you can display the image from an IP camera and use the PTZ functions. Currently the IP camera tester supports more than 70 brands' IP cameras, such as most, ACTi, Dahua, Hikvision, Samsung, Honeywell and many more.
OEM service is available. Users can send us the IP camera for our engineers try to add the protocols to the tester, or send us the mobile apps (Android version. APK files) to install in the tester.2.3.7 Analog camera test Displays an analog camera image on the 7 inch 1280x800 LCD screen display. Supports PAL & NTSC formats. The LCD screen's back light brightness, video image brightness, contrast and color saturation are all adjustable. 2.3.8 Video level meter (Optional) Perform NTSC and PAL video amplitude signal measurements for PEAK to PEAK , SYNC levels, and COLOR BURST chroma level
Video signal PEAK to PEAK level:
For NTSC format, the video signal level is 140±15IRE
For PAL format, the video signal level is 1000±200mV
If the level is too low, it will cause the image to lose quality and limit the distance it will travel over cable. If the level is too high, it will lead to wash out of the image
SYNC level: Testing the amplitude of the video sync pulse to verify if the video level is correct.
For NTSC format, the SYNC level is 40 ± 5IRE
For PAL format, the SYNC level is 300 ± 35mV
If the level is too low, it will cause the image to not frame out properly. If the level is too high, it will lead to a poor quality
COLOR BURST level: Testing the color burst level will determine if the burst signal is sufficient to trigger the displays color producing circuit. Burst will diminish in amplitude over longer cable runs and can get fall below the threshold for the video display to show a color image.
For NTSC format, the Chroma standard level is 40 IRE
For PAL format, the Chroma standard level is 280mV
If the Chroma level is too low, the color will not be as deep, and some details of the image will get washed out. If the Chroma level is too high, there will be spots on the image. If the coaxial cable is too long, it will reduce the chroma level2.3.9 PTZ controller Displays and allows for analysis of analog video and controls Pan/tilt/zoom function of PTZ analog cameras. For PTZ testing, setup the controlling parameters from the meter to match those of the camera: e.g. PTZ protocol (PELCO-D, etc.), communication port (RS-485, etc.), baud rate, PTZ camera ID and pan/tilt speed. 2.3.10 Enhanced Color bar generator
The tester sends out color bars via its BNC output to the monitor. This is used to test for a problem in the cable going from the camera back to the monitoring area2.3.11 12VDC 2A power output port and 5VDC 2A USB power port The unit can power a camera with its 12V DC 2A power output. Also included is a built in 5V DC 2A power output port used to charge USB devices. NOTE: This USB port is for charging only and has no ability to transfer data. 2.3.12 Audio testingTest the audio from mic level input devices. Connect the tester and mic level device with the audio cable. Supports audio recording and output. To monitor and / or record audio. 2.3.13 Cable tester Test LAN cable or telephone cable.
Connect LAN cable or telephone cable with the CCTV tester and cable tester. And then the connecting status, cable type and the sequence of wires will be displayed, as well as display the serial number of the cable tester kit.2.3.14 PTZ data analysisSearch the Control protocol code from Multifunction keyboard or DVR by RS485 interface, test the PTZ control command data whether received anomaly and RS485 data transmission.
Screen displays 16 hexadecimal codes such as
PELCO-P:A0 00(Add) xx xxxxxx AF xx
PELCO-D:FF 01(Add)xx xxxxxxxx2.3.15 Digital Image zoom on the monitorSet image zoom up to 4X to get a closer look at all the image detail. Supports analog and many IP cameras2.3.16 Video screenshot, record and playback Capture the video image displayed and save as a JPEG file. You can also record and save the current video to the SD card. The recorded files can play directly via Media player or under the function of "Playback".2.3.17 DHCP dynamic address assignmentBuilt in DHCP server: Dynamically assign IP address for the IP camera or network device. 2.3.18 Access the dynamic IP address
The IP tester can directly access a dynamic IP address assigned from its DHCP server and use it as the tester's IP address. No need to set a IP address manually. 2.3.19 Multiple network IP Cameras Test
Supports Multi- segmented Static IP address setting which can simultaneously test different segments of IP network Cameras.2.3.20 IP address scan The IP address scan can quickly search for connected IP cameras or another network device IP address. 2.3.21 PING Test
PING is the most conventional network debugging tool; it is used for testing if the connected IP camera or other network equipment is working normally and the IP address is correct.2.3.22 Port FinderThe tester will send signals to make the connected PoE port flicker at a set frequency. This will enable the installer to easily and quickly find the connected port for an Ethernet cable.2.3.23 PoE Test Test the PoE voltage from a PoE switch. The unit will clearly display the voltage for each wire in an Ethernet cable. 2.3.24 Digital Multi-meter (*Optional)
The tester has built in highly stable and reliable 33/4 digit (6600) digital multi-meter. It is used for the DC and AC voltage measurement, AC and DC current measurement, Resistance measurement, Continuity test, Diode measurements, Capacitance measurement, Auto/Manual measuring range switching, relative value measurement and locking. It is easy operation and professionally accurate.2.3.25 Visual fault locator ( *Optional )Visual Fault Locator with 650nm wavelength can emit red laser sources to test multi-mode and single mode fiber's bending and breakage, and Continuous light-emitting and 1HZ, 2Hz modulating light output. It is indispensable tool in fiber project constructing, fiber net-work maintaining, optical component manufacture and research.2.3.26 Optical Power Meter ( *Optional )The IP camera tester adopts the most advanced handheld instrument specific integrated chip , achieve ultra-low power operation, with the 7 TFT-LCD High-definition screen display ,five wavelength calibration points 1625nm,1550nm ,1490nm , 1310nm , 1300nm , 850nm.Linear or nonlinear optical power display, it can measure the optical power value, and also be used for Relative measurement of optical fiber link loss. It is necessary tool for fibre-optic communication, cable television system and security system maintenance. 2.3.27 LED FlashlightPress the LED On/Off button to use the LED flashlight. 2.3.28 TDR cable open circuit and short circuit measurement ( *Optional )TDR cable testing, accurately measure BNC cable, network cable, controls cable's open circuit and short-circuits location. It greatly improves working efficiency.2.3.29 WIFI With built in WIFI, you can view the video from a wireless camera (ONVIF or customized camera) or connect to a Wireless network. 2.3.30 SDI camera test ( *Optional )
SDI digital video surveillance testing, support 720p 60fps / 1080p 30fps / 1080i 60fps digital camera image test and video image zoom, record, snapshot, photo viewer and video playback .2.3.31 CVI camera test ( *Optional )HD CVI video surveillance testing, support720p 25,30,50,60fps / 1080p 25,30fps, when CVI signal input, HD CVI camera image display, zoom, view photos, video record and playback, Coaxial PTZ control and call up the camera OSD menu. 2.3.32 TVI camera test ( *Optional )HD TVI video surveillance testing, support720p 25,30,50,60fps/ 1080p 25,30fps /2048x1536 ,18 fps / , when TVI signal input , HD TVI camera image display, zoom ,view photos ,video record and playback .Coaxial PTZ control and call up the camera OSD menu. 2.3.33 AHD camera test ( *Optional )AHD video surveillance testing, support 720p 25,30fps/ 1080p 25,30fps, when AHD signal input , AHD camera image display, zoom ,view photos ,video record and playback ,Coaxial PTZ control and call up the camera OSD menu. 2.3.34 PoE power supply Supports PoE 802.3at power at 48V and up to 24W.
2.3.35 HDMI signal output
The HDMI output port supports up to a 1080p 60Hz resolution output.2.3.36 Network bandwidth testingThe network bandwidth test needs two IP tester meters to test bandwidth: one as a transmitter, the other as a receiver.2.3.37 Cable Tracer (Optional)Cable identification by use of an audio signal. This function enables the blue cable tracer to find the connected cable from a bundle of cables with an audio tone. 2.3.38 Screen image rotates 180 degrees You can manually rotate the display 180 degrees using the settings. .2.3.39 FTP ServerStart the tester's Wi-Fi or connect the tester's LAN port to the network. Once the tester is online, start its FTP Server and directly access files from the tester's SD card. This also allows for the user to upgrade the tester firmware.
2.4 Packing list
. Tester
2). Adaptor DC12V 2A
3) Network cable tester
4) Polymer lithium ion battery (7.4V DC 5800mAh)
5). BNC cable
6). RS485 cable
7). SC,ST connector(Only for optical power meter)
8). Multi-meter test leads one pair of red and black (only for the Multi-meter models)
9). Output Power cable
10). Audio cable
11). TDR alligator clamp (only for TDR models)
12). Safety cord
13). Tool bag
14). Manual
15) 8GB SD card
